Best Doors PD30 Double Action Door Set -/30/30
The Best Doors PD30 double action steel framed door set is a 180° pivoting door. The door set configuration may be single leaf or pair, finished with a variety of facings and pivoted in a steel frame.
Please note that the maximum leaf width shown above is measured per door leaf.
The Best Double Action fire door set can be supplied as a smoke control door as defined in the NZBC Acceptable Solutions.
Bottom seals are not available with this door type.
Insulation ratings must be notified at time of pricing for steel frames.
Steel - mild or stainless (0.6 - 0.9mm)
Decorative timber mouldings
High pressure laminate up to 1.5mm thick (e.g. Laminex, Formica)
Steel frames are required where metal capping is used.
Standard Paint Quality doors are allowed ‘non-clashed’ to provide best surface for finish painting
Other facings may be available, please contact Best Doors to discuss further options.
The leaf edges listed below are available for the PD30 door set
This door set is not available in a timber jamb.
The steel frame profiles listed below are available for the PD30 door set.
For more in depth information on frame profiles and sizes, please see our Installation Instructions.
The below meeting stiles are applicable to paired door sets only.
Jambs may be connected to timber stud, steel stud or concrete/masonry walls.
The minimum specification for each wall type is:
Precast concrete (150mm thickness minimum) or grouted blockwork (140mm thickness minimum).
Non-load bearing steel stud partitions of minimum specifications GBS60 (for PD30) or GBS90 (for PD60).
Note that 100mm nom. wall framing is necessary where fitting of the head spring hardware is specified.
Non-load bearing timber stud partitions of minimum specifications GBT30 (for PD30) or GBT60b (for PD30) or GBT90 (for PD90) (as listed in “Gib® Fire Rated Systems”), all based on minimum 100x50mm framing. Note that minimum 100mm nom. wall framing is necessary where fitting of head spring hardware is specified.
Product Optional Extras
- Please note that the height and width of the vision panel must still fall within the maximum glazed area.
- Glazing types marked with * indicate Grade A Safety glass.
For 30 minute door sets with larger vision panel options, please contact Best Doors
CIRCULAR VISION PANELS
STANDARD VISION PANEL CROSS SECTIONS
Sidelights and Overlights are not applicable to this door set. Please contact Best Doors to discuss your requirements.
Steel Framed Transom Overpanel Elevations and Details
Overpanels with transom are available to an overall height of 3600mm for single or paired door sets. Please note that when adding an overpanel to this door set, the permitted height and width of the door leaf reduces to 2040h x 930w.
PUSH OR KICKPLATES
Push plates or kickplates can be of the below permitted materials . These may be surface mounted or recessed flush with the door facing. Fixing by screws or contact adhesive.
Adjacent fire rated doors are permitted provided the central mullion is grouted steel. Maximum width of the coupled door sets is 3600mm overall.
A modified door set allowing two door leaves to open 90deg in opposite directions and closing onto short header-fixed stops is available.
This door leaf has a thermal insulation rating (R-value) of 0.645 Km2/W.
The PD30 fire door complies with the requirements of NZS 4520 Fire-resistant door sets when installed in accordance with Best Doors Installation Instructions into a complying fire-resistant wall, and when fitted with approved hardware.
NZS 4520 is referenced in the New Zealand Building Code Acceptable Solutions (Appendix C 6.1.1)
Best Doors PD30 fire doors have been successfully fire-tested in accordance with AS1530.4, as referenced in NZS 4520 and in Appendix C 5.1.1.
The fire resistance achieved by the PD30 was FRR -/30/30
The PD30 fire door will satisfy the requirements of NZBC, B2 “Durability” under conditions of use, installation and maintenance specified by Best Doors, or specific contractual guarantees, whichever are overriding.