Smoke Control

Best Doors Smoke Control door set is certified to provide protection from the spread of smoke. The use of seals to the vertical edges and head of the door set enable this door set to be certified as smoke control. Bottom seals rebated into the leaf are also available.

The product table below gives a brief summary of our specialist fire door products by:

Fire Rating (measured in minutes),

Application (whether the door is hinged, sliding or Double Action)

Full datasheet, installation instructions and hardware possibilities of each door set.

Please note that there are other fire doors available within our suite of products that are not on the list below. Please use the navigation bar to access these products.

  • Smoke Control

    Best Doors Smoke Control Door Set -/-/-sm

    Hinged

    The Smoke Control door set is a solid core door set, 40mm thick with smoke seals to the head and jambs of the frame. This door set provides a barrier so that smoke cannot easily pass between rooms. 

    updated : 12/4/2024

    Best Smoke Control door sets are manufactured to comply with the requirements of the NZ Building Code (NZBC), set out in the Acceptable Solutions Appendix C, C6.1.2. They are required if doors are needed in smoke separations.

    The door set configuration may be single leaf or pair, finished with a variety of facings and hung or pivoted in a timber or steel frame. An additional seal to the bottom of the door leaf can be added upon request.

    The minimum thickness of the Smoke Control leaf is 40mm with an approximate leaf weight of 27kg/m2

    Notes:

    Please note that the maximum leaf width shown above is measured per door leaf.

    The ‘sm’ above denotes that the door is available as a smoke control door set.

    View product
    Installation
    Hardware